Keep your attendance machines. Connect them to the cloud.

Replacing working terminals because they do not talk to your HR software is expensive and usually unnecessary. Most machines from the big brands can connect to the cloud as they are, or through a small connector on site.

Three routes

How existing machines connect

A terminal takes the first route that its model supports.

RouteHow it worksDetails on camsbiometrics.com
Direct to the cloudVerified models send every punch to the Cams cloud over the internet by themselves: no PC, real-time, and users can be enrolled and synced from the cloud. Models that need a little help connect as a Cams Open Terminal.Cams Open Terminal
Cams Open TerminalFor any other terminal, including older and LAN-only machines. You pick the terminal type, enter its serial and test it free in the sandbox with a few users before you buy. The punches reach the Cams cloud from the machine's own cloud, from a Cams Bridge on site (SDK or attendance database), or from the Cams Crew Mobile app.Cams Open Terminal
On your own serverProtocol Engine Lite runs on your server, on Windows or Linux, for networks that must stay closed or cannot reach the internet. Terminals talk to your server instead of the Cams cloud.Protocol Engine Lite for ZKTeco and eSSL

Step one

Check your model, free

Describe the machine

Enter its brand, model and how it connects on developer.camsbiometrics.com. It is free and needs no purchase.

Connect it for a test

Follow the setup steps shown for your model to connect the machine to the test system.

Run the guided checks

Register a user, record a punch, delete a user: the test confirms which operations your machine supports and which route it needs.

Is it worth it?

Connect or replace?

Connecting is usually cheaper than replacing when the terminals still read well, suit the site and are supported. Replacing makes sense when terminals are failing, when fingerprints keep being rejected (a face terminal may suit the site better), or when the model cannot connect at all.

Mixing is normal: keep the machines that work, add new ones where they are needed, and run all of them from one account.

Enrolled users stay on the terminals you keep. Fingerprint templates from different brands are often not interchangeable, so a person who moves to another brand's terminal is enrolled again there.

FAQ

Existing machines: questions

Do staff have to enrol again?

Not on the terminals you keep: their enrolled users stay. Users can be copied between compatible models; a person moving to a different brand's terminal usually enrols again, because templates are often vendor-specific.

Does connecting need a PC on site?

Not for machines that connect directly. A Cams Open Terminal needs a PC on site (the Cams Bridge) only when the machine can be read only on the local network.

Can machines without internet access be connected?

Yes. A Cams Bridge on site reads them on the local network, and Protocol Engine Lite can keep everything on your own server for networks that must stay closed.

What does it cost?

Each connected terminal needs a Cams API licence: a one-time activation plus a yearly fee, with no per-employee charge. Terminals that cannot connect directly are added as a Cams Open Terminal, which you can test free in the sandbox before you buy. Current ranges are on the Cams pricing section.

Not sure what you have?

Send the brand and model of your machines and Cams will tell you how they connect and what it costs.