RFID card attendance machine

Card terminals are the cheapest and quickest way to record attendance: tap a card and walk on. Their weakness is that a card proves who is holding it, not who the person is. Here is when cards are enough and when to pair them with a biometric.

How it works

What happens at each punch

An RFID card holds a small chip and an antenna. When it comes close to the terminal, the terminal powers the chip by radio and reads its number, which is linked to one employee. The punch records that number with the date and time, exactly as a fingerprint punch records a user ID.

The two common card families are 125 kHz proximity cards (often called EM cards), which carry a fixed number and can be copied with cheap tools, and 13.56 MHz smart cards such as MIFARE, which can hold encrypted data and are harder to clone. Long-range UHF readers work at several metres and are used to log vehicles at gates.

Where it works well

  • Visitors, contractors and temporary staff who should not be enrolled biometrically
  • Large headcounts on a small budget: cards cost little and punches take a fraction of a second
  • Places that already issue ID cards and want to reuse them
  • Workplaces where biometrics are restricted, as the non-biometric alternative
  • Canteens and doors, where the same card does several jobs

Where it struggles

  • Buddy punching: anyone can tap a colleague's card
  • Lost and forgotten cards: replacement cost and admin
  • Basic 125 kHz cards are easy to clone
  • Cards say nothing about who is actually standing at the door

Before you buy

What to check in an RFID card attendance machine

The questions that separate a terminal you will be happy with in three years from one you replace.

What to checkWhy it mattersAsk the vendor
Card frequencyMust match the cards you already use or plan to issue.Does it read 125 kHz, 13.56 MHz MIFARE, or both?
Card plus biometricThe usual cure for buddy punching at the main entrance.Can a punch require a card and a fingerprint or face together?
Read range and speedDecides how quickly a crowd passes.From how far does it read, and how fast?
EncryptionStops copied cards from working.Does it read encrypted sectors, or only the card number?
Door and turnstile outputCard readers often control doors too.Does it have a relay or Wiegand output for a lock or turnstile?
Connection and softwareCard punches still have to reach payroll.Does it send punches to the cloud and on to your HR software?

Getting it right

Installation and enrolment tips

  • Use cards where identity risk is low (visitors, canteen, internal doors) and a biometric where it is high (the time clock).
  • Combine card and face at the main entrance if you must use cards for everyone.
  • Choose 13.56 MHz cards for new deployments if cloning worries you.
  • Disable a lost card at once from the software, before you issue the new one.

After the punch

Get the punches into your software

A terminal that only stores punches is half a system. Someone still has to export them, clean them up and type them into payroll. Connected to a cloud service, the same terminal sends every punch to your HR, payroll or ERP software as it happens, whatever its brand.

How to connect an attendance machine to payroll software compares the options, from Excel exports to ready-made integrations.

Cams card terminals and readers

Cams offers card-capable attendance terminals, card readers for exit doors, a four-door access controller and a long-range UHF reader for vehicles. Card punches go through the Cams cloud to your HR or payroll software like any other punch.

FAQ

RFID card attendance machine: questions buyers ask

What is the difference between 125 kHz and 13.56 MHz cards?

125 kHz proximity cards carry a fixed number and are easy to copy. 13.56 MHz smart cards such as MIFARE can store encrypted data and are much harder to clone. Most new installations choose 13.56 MHz.

Can we use the ID cards our staff already have?

Often yes, if the terminal reads the same frequency and card type. Ask the vendor to test one of your cards before ordering.

How do we stop buddy punching with cards?

Require a card plus a fingerprint or face at the time clock, or use a biometric there and keep cards for doors and visitors.

Do card punches reach payroll the same way as fingerprint punches?

Yes. A card punch records an ID and a time; the software that receives it cannot tell, and does not need to know, whether it came from a card or a finger.