Keep your Hikvision terminals. Connect them to HR and payroll.

Hikvision face recognition terminals are often installed by a security integrator for door access, and attendance comes second. Here is how their punches can reach your HR or payroll software through the Cams cloud.

Today

How Hikvision machines usually run

Hikvision terminals usually report to Hikvision's own platforms, Hik-Connect or HikCentral on a server, set up for security and access control. Attendance reports are possible there, but sending every punch into an HR or payroll system tends to become a custom project for the integrator, repeated for every site.

Hikvision is on Cams' list of verified brands, so supported models can report punches to the Cams cloud, which then delivers them to your HR software through a ready-made integration. Support depends on the exact model and firmware, so check first.

What stays the same

  • The terminals on the wall and their wiring
  • Enrolled users and how people punch
  • Card and PIN options already set up

What goes away

  • The office PC that has to stay switched on
  • Monthly exports and re-typing into payroll
  • One separate system per branch

Ways to connect

Connecting Hikvision machines: the options

Which one applies depends on the model. The free model check tells you.

RouteHow it worksDetails on camsbiometrics.com
Direct to the cloudVerified models send every punch to the Cams cloud over the internet by themselves: no PC, real-time, and users can be enrolled and synced from the cloud. Models that need a little help connect as a Cams Open Terminal.Cams Open Terminal
Cams Open TerminalFor any other terminal, including older and LAN-only machines. You pick the terminal type, enter its serial and test it free in the sandbox with a few users before you buy. The punches reach the Cams cloud from the machine's own cloud, from a Cams Bridge on site (SDK or attendance database), or from the Cams Crew Mobile app.Cams Open Terminal

Step one

Check your model before anything else

Describe the machine

Enter its brand, model and how it connects on developer.camsbiometrics.com. It is free and needs no purchase.

Connect it for a test

Follow the setup steps shown for your model to connect the machine to the test system.

Run the guided checks

Register a user, record a punch, delete a user: the test confirms which operations your machine supports and which route it needs.

Once connected

What your Hikvision machines can do next

  • Feed your HR, payroll or ERP software through ready-made integrations, punch by punch.
  • Run every branch from one account, with each terminal labelled by site.
  • Enrol and sync users from the cloud on models connected directly.
  • Work with AI assistants and automations through the Cams API and MCP server.

Connect Hikvision machines with Cams

Cams connects ZKTeco, eSSL, Hikvision and 90+ other brands to its cloud, directly, through a Cams Open Terminal, or with Protocol Engine Lite on your own server.

FAQ

Hikvision machines and the cloud: questions

Which Hikvision models are supported?

Support depends on model and firmware, so check yours at developer.camsbiometrics.com before you plan the change.

Will the terminal keep controlling the door?

Door control is configured on the terminal and its lock wiring. Before you change the terminal's server settings, agree the plan with whoever installed and maintains your access control.

Do we need HikCentral for attendance?

Not to send punches to HR software through Cams. Whether you keep HikCentral for cameras and doors is a separate decision for your security team.

Can Hikvision terminals feed the same HR system as our fingerprint machines?

Yes. Face punches from Hikvision and fingerprint punches from any other supported brand arrive in your HR software in the same form.

What does it cost?

Each connected terminal needs a Cams API licence: a one-time activation plus a yearly fee, with no per-employee charge. Terminals that cannot connect directly are added as a Cams Open Terminal, which you can test free in the sandbox before you buy. Current ranges are on the Cams pricing section.