Keep your ZKTeco machines. Connect them to the cloud.
ZKTeco terminals are everywhere, and most of them can do more than feed a desktop program. Here is how to connect the ZKTeco fingerprint and face machines you already own to the cloud and to your HR or payroll software, without replacing them.
Today
How ZKTeco machines usually run
Most ZKTeco installations follow one of two patterns. Either the terminals sit on the office network and a PC runs attendance software that pulls punches from them, and someone exports a report for payroll; or the terminal works standalone and punches leave it on a USB stick. Both are fine for one site. Both break down with several branches, a PC that gets switched off, or an HR system that wants punches every day rather than every month.
Many ZKTeco models can also push punches to a server over the internet, a feature ZKTeco calls ADMS or push communication. That is the feature a cloud service uses: point the terminal at the cloud and it reports every punch as it happens, from any site with an internet connection.
What stays the same
- The terminals on the wall and their wiring
- Enrolled users and how people punch
- Card and PIN options already set up
What goes away
- The office PC that has to stay switched on
- Monthly exports and re-typing into payroll
- One separate system per branch
Ways to connect
Connecting ZKTeco machines: the options
Which one applies depends on the model. The free model check tells you.
| Route | How it works | Details on camsbiometrics.com |
|---|---|---|
| Direct to the cloud | Verified models send every punch to the Cams cloud over the internet by themselves: no PC, real-time, and users can be enrolled and synced from the cloud. Models that need a little help connect as a Cams Open Terminal. | Cams Open Terminal |
| Cams Open Terminal | For any other terminal, including older and LAN-only machines. You pick the terminal type, enter its serial and test it free in the sandbox with a few users before you buy. The punches reach the Cams cloud from the machine's own cloud, from a Cams Bridge on site (SDK or attendance database), or from the Cams Crew Mobile app. | Cams Open Terminal |
| On your own server | Protocol Engine Lite runs on your server, on Windows or Linux, for networks that must stay closed or cannot reach the internet. Terminals talk to your server instead of the Cams cloud. | Protocol Engine Lite for ZKTeco and eSSL |
Step one
Check your model before anything else
Describe the machine
Enter its brand, model and how it connects on developer.camsbiometrics.com. It is free and needs no purchase.
Connect it for a test
Follow the setup steps shown for your model to connect the machine to the test system.
Run the guided checks
Register a user, record a punch, delete a user: the test confirms which operations your machine supports and which route it needs.
Once connected
What your ZKTeco machines can do next
- Feed your HR, payroll or ERP software through ready-made integrations, punch by punch.
- Run every branch from one account, with each terminal labelled by site.
- Enrol and sync users from the cloud on models connected directly.
- Work with AI assistants and automations through the Cams API and MCP server.
Connect ZKTeco machines with Cams
Cams connects ZKTeco, eSSL, Hikvision and 90+ other brands to its cloud, directly, through a Cams Open Terminal, or with Protocol Engine Lite on your own server.
FAQ
ZKTeco machines and the cloud: questions
Will connecting to the cloud erase the users on my ZKTeco terminal?
No. Pointing a terminal at a cloud server does not remove its enrolled users or fingerprints. Make the change at a quiet hour all the same, and download the punch logs first.
Does my ZKTeco model support push (ADMS)?
Many recent models do; their menu usually has a cloud server or ADMS setting. The free check at developer.camsbiometrics.com tells you for certain whether your model connects directly, or is added as a Cams Open Terminal.
Can I keep using ZKTeco's own attendance software?
Keep it for your old records. Pick a changeover date, usually the start of a payroll month: once punches reach your HR software through the cloud, the PC that ran it is no longer needed for attendance.
Can I mix ZKTeco terminals with other brands?
Yes. Every terminal on the same Cams account feeds the same integrations, whatever its brand, so a new site can use a different terminal from an old one.
What does it cost?
Each connected terminal needs a Cams API licence: a one-time activation plus a yearly fee, with no per-employee charge. Terminals that cannot connect directly are added as a Cams Open Terminal, which you can test free in the sandbox before you buy. Current ranges are on the Cams pricing section.