Workday time clock integration
Workday takes punches from third-party time clocks through an integration that your Workday team or partner configures. Cams sends every punch from your biometric terminals to that integration, from any site and any terminal brand.
Workday
Where the punches have to go
Workday is a cloud HR and finance system used by large employers. Its Time Tracking can take time clock events from outside systems; the receiving end is usually set up by your Workday partner, who then gives the time clocks an address and keys to use.
An integration removes the file in the middle: every punch travels from the terminal to the Cams cloud and on to Workday by itself, from every site, whatever the terminal brand.
What reaches Workday
Punch by punch
Every punch is sent to the Workday integration in the Cams 3.0 format as it happens, so time data in Workday stays current across all your sites.
- The user ID of the person who punched
- Punch date, time and direction
- The terminal's serial number
Setup
How to connect Workday
Connect the terminals to the Cams cloud
Cams terminals connect out of the box. For terminals you already own, check the model for free at developer.camsbiometrics.com: supported models connect directly over the internet, older ones as a Cams Open Terminal.
Line up the employee IDs
Your Workday partner maps the terminal user ID to the worker in Workday, so keep each person's user ID the same on every terminal they use.
Add Workday in the Cams console
Open Configurations, then Connectors, add Workday and enter what it asks for (list on the right). Choose which terminals send to it.
Punches flow
From then on every punch reaches Workday, usually within a minute. Failed deliveries are retried and listed in the console, so problems are visible instead of silent.
What you need
- The address your Workday partner gives you
- An authentication token and a security key
Good to know
- Terminals in different countries can feed the same Workday tenant.
- Failed deliveries are retried and shown in your Cams console.
Hardware
Which attendance machines work with Workday
Every Cams terminal, and terminals from ZKTeco, eSSL, Hikvision, Suprema, Anviz and many of the 90+ other brands that connect to the Cams cloud. Fingerprint, face, palm and card punches all reach Workday in the same form, so you can mix technologies and brands across sites.
Choosing new terminals? Start with the types of attendance machine. Keeping the ones you have? See connecting existing machines to the cloud.
Set it up with Cams
The Workday integration is one of 70+ ready-made integrations on the Cams Biometric Gateway. The page on camsbiometrics.com lists every field, the licence that applies and the price.
FAQ
Workday attendance integration: questions
Who sets up the Workday side?
Your Workday team or partner. They configure where time clock punches arrive in Workday and give you the address and keys to enter in the Cams console.
Can terminals in several countries feed one Workday tenant?
Yes. Every terminal on your Cams account can send to the same Workday integration, wherever it is.
Can we keep the terminals we already have?
In most cases, yes. Check the model for free at developer.camsbiometrics.com. Supported models connect straight to the Cams cloud; older or LAN-only models connect through the Hybrid Connector, a small program on a PC on site. Either way the Workday integration takes the punches from there. See keeping the machines you have.
What does it cost?
Each terminal needs a Cams API licence: a one-time activation plus a yearly fee, with no per-employee or per-punch charge. Some integrations are included with that licence and some are paid; the Workday page on camsbiometrics.com shows which applies and the price.